Risk Racing revolutionized the way riders transport their bikes years ago with the introduction of the Lock-N-Load and the Lock-N-Load Junior. Riders kicked their tie-down straps to the curb and started adapting the strapless way of life. The current Lock-N-Load system that paved the way for strapless hauling is not going anywhere, but RISK is taking things to a whole new level in regard to versatility and usability.
Risk Racing is proud to introduce the new Lock-N-Load PRO and PRO Mini Moto Transport Systems. The PRO systems are fully adjustable in both width and height. This adjustability combo creates the opportunity to capture a much broader range of bikes. Users simply set the appropriate width and then roll the bike into the system and press down on the ratcheting jaws until the bike is secure. The new PRO systems know few limits and can haul numerous bikes from a Cobra 50cc to a KTM 690 Enduro!
The Lock-N-Load Pro Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by loosening the 2 screws and removing the struts, leaving only the low profile mounting plate.
The Lock-n-Load is fully adjustable thanks to the new easy-to-use ratchet system. No matter what size bike you are transporting, they will be secure. To release your bike is as easy as a flip of the release switch. Flip it down when locking the bike in place, flip it up to release the jaws. The low profile mounting plate can be mounted in your truck, trailer or van. Have confidence your bike will get to the track safely no matter how you transport them
How to measure your bike:
To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure foot-peg height. Make sure both measurements are the same. Feel free to call us if you have any bike specific questions. The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.
Risk Racing Lock N Load features:
- Bike Size Range from 85cc-690 Enduro (Max Weight 315lbs)
- All mounting hardware included
- Reduce pressure on fork seals
- No more straps or wheel chocks
- Load more bikes and gear in your truck, van or trailer
- Quick release from floor
- Fully adjustable
- Mounts in your trailer, truck or van
- Works with 2-strokes and 4-strokes
- Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
- Weight: 13.2lb (5.98kg)
- 1 year warranty
- Designed to fit 85cc to Enduro bikes (or bikes with similar geometry)
Whats INCLUDED in your box:
